Products

54”,50”,40”,36”,24” Galvanized Steel Centrifugal Ventilation Exhaust Fan for Poultry Farm/Greenhouse/Industry

54”,50”,40”,36”,24” Galvanized Steel Centrifugal Ventilation Exhaust Fan for Poultry Farm/Greenhouse/Industry

Fan Brand	Yuyun Sanhe
Fan Model	DJF-1530, DJF-1380,DJF-1100,DJF-1000,DJF-750
Outline Size	1530mm,1380mm,1100mm,1000mm,750mm
Blades Diameter	1400mm,1270mm,1000mm,910mm,600mm
Frame Material	Galvanized Steel/304SS
Blades Material	430SS/304SS
Motor Brand	Yuyun Sanhe Motor/Siemens Motor/WEG motor/ABB motor
Belt Brand	Mitsuboshi Belt
Voltage	220V/380V/Customized
Phase	1 phase / 3 phase
Frequency	50HZ/60HZ

Inquiry

Application
Parameter
Detail
Certification
Workshop
Packing and Transportation
Installation

Application

DJF Series Centrifugal Push-Pull Exhaust fan are widely used in Agriculture and industry ventilation and cooling. It is mainly used for animal husbandry, poultry house, livestock breeding, greenhouse, factory workshop, textile etc.

Parameter

Model	Drive	Blades Diameter (mm)	Blades Rotational Speed (rpm)	Motor Rotational Speed (rpm)	Air Flow (m³/h)	Total Pressure (pa)	Noise Decibels (dB)	Input Power (W)	Power Parameter	Height (mm)	Width (mm)	Thickness (mm)
DJF-750	Direct	600	960	960	10600	75	≤70	370	380V/50Hz	750	750	510
DJF-1000	Belt	910	500	1400	21000	57	≤70	550	380V/50Hz	1000	1000	450
DJF-1100	Belt	1000	470	1400	31600	57	≤65	750	380V/50Hz	1100	1100	450
DJF-1380	Belt	1270	458	1400	44000	57	≤65	1100	380V/50Hz	1380	1380	450
DJF-1380(plus)	Belt	1270	480	1400	61000	57	≤70	1500	380V/50Hz	1380	1380	450
DJF-1530	Belt	1400	440	1400	62000	70	≤70	1500	380V/50Hz	1530	1530	450

Note: the voltage and frequency can be customized

Detailed Introduction

Fan frame material are all 275g/㎡ hot-dip galvanized steel. The steel coils are directly purchased from the famous Chinese steel company, which not only guarantees product quality but also reduces production costs.
Fan blades material is Krupp self-cleaning 430BA stainless steel, large air volume, high efficiency, no deformation, no dust, beautiful and durable. 304 2B stainless steel blades can also be customized.
Belt pulley and flange are made of high-strength aluminum-magnesium alloy by die-casting, light weight, low vibration, high sliength, and no breakage.
Imported double-row bearing with special waterproof design, high sliength, low noise, free maintenance and long service life.
Centrifugal opening system can ensure that the shutters are fully opened or closed. Material: High quality nylon PA66, long service lifeThe fasterners and guide rod are 304SS, wear resistance, no rust, good flexibility, reduce friction coefficient.
Mitsuboshi belt imported from Japan to guarantee quality and service life.
1. High-quality nylon shutter plastic parts, long service life and flexible opening.
2. Shutters are made of 275g/㎡ hot-dip galvanized sheet, good sealing, no deformation.
The auxiliary shutters thickness: 0.8mm, The middle opening shutter: 1.5mm
Safe net is made of hot-dip galvanized wire welding and plastic spraying lieatment, double protection, no rust.
Thickened aluminum alloy linking parts, light weight, no deformation, no aging. The plastic parts are automatically locked, which is easy to install and will not fall off.
Aluminum-magnesium alloy base, low vibration, firm fixation, beautiful appearance and no rust.
Yuyun Sanhe motor, Siemens motor, WEG motor, ABB motor are optional. Voltage and Frequency can be customized.
Protection Grade: IP55 Insulation Level: F
The motor base plate is fixed with hexagonal rivet nuts and stainless steel washers are added, never loosen.
Stainless steel washer, no rust, beautiful appearance.
Fan blades have been calibrated by an advanced computer dynamic balance tester, low vibration, low noise and high stability.
All fan parts are produced by CNC slieamlined production, quality assurance, beautiful appearance, leading the industry.